User`s guide

4-16 Configuring Your Server
Option Parameter Description Your Setting
[ ]: Factory-set
IMPORTANT: To power on the server from the UPS (Uninterruptible Power Supply), select
[Server] - [AC LINK] - [Power On].
The table below shows the operation when the AC power to the server is turn off once and then on again, depending on the
setting of "AC LINK."
Setting of AC LINK
System status before AC power off
Stay Off Last State Power On
Operating Off On On
Aborting (DC power being off also) Off Off On
Forced shutdown Off Off On
* Press the power switch continuously for four seconds or longer. This forcibly turns off the power.