User`s guide

Configuring Your Server 4-13
Option Parameter Description Your Setting
Power Switch
Inhibit
[Disabled]
Enabled
Enables or disables the POWER
switch mask feature. If "Enabled" is
selected, power-off with the POWER
switch becomes unavailable after
OS boot-up. (Forced shut down
feature is always acceptable to the
server. Forced shut down is a
feature to shut down by pressing the
POWER switch for at least four
seconds.)
Disable USB
Ports
[Disabled]
Front
Rear
Internal
Front + Rear
Front + Internal
Rear + Internal
Front + Rear + Internal
Enables or disables the USB ports.
[ ]: Factory-set
Security Chip Configuration Submenu
Option Parameter Description Your Setting
TPM Support [Disabled]
Enabled
Disables or enables TPM feature.
Current TPM
State
– Displays the current TPM state.
Change TPM
State
[No Change]
Enable & Activate
Deactivate & Disable
Clear
Changes TPM state.
(This option can be selected only
when the supervisor password is
set.)
[ ]: Factory-set