User`s guide

Configuring Your Server 4-9
PCI Configuration
– Onboard Video Controller submenu
Option Parameter Description Your Setting
VGA Controller Disabled
[Enabled]
If Disabled, the BIOS will hold the
embedded chip in reset.
Onboard VGA
Option ROM Scan
[Auto]
Force
Allows selecting the onboard VGA
controller or optional PCI VGA controller as
the display device that will be active when
the system boots.
The “Force” option is selected to use the
onboard VGA controller if the optional PCI
VGA controller is installed in the system.
[ ]: Factory-set
– Onboard LAN submenu
Option Parameter Description Your Setting
LAN Controller Disabled
[Enabled]
If Disabled, the BIOS will hold the
embedded chip in reset.
LAN1 Option ROM
Scan
Disabled
[Enabled]
If Enabled, initialize device expansion
ROM.
LAN2 Option ROM
Scan
Disabled
[Enabled]
If Enabled, initialize device expansion
ROM.
[ ]: Factory-set
Option Parameter Description Your Setting
PCI Slot 0A Option
ROM
[Enabled]
Disabled
TBD
PCI Slot 1B
Option ROM
Disabled
[Enabled]
Used to enable or disable an option ROM
on a PCI board connected to the full-height
riser card.
PCI Slot 1C
Option ROM
Disabled
[Enabled]
Used to enable or disable an option ROM
on a PCI board connected to the low-profile
riser card.
[ ]: Factory-set