User`s guide
7-12
NovaScale R422-E2/R422-INF-E2 Installation and User's Guide
IDE/SATA/Floppy Conguration
When this submenu is selected, the AMI BIOS automatically detects the pres-
ence of the IDE devices and displays the following items:
SATA#1 Conguration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while
selecting Enhanced sets SATA#1 to native SATA mode. The options are
Disabled, Compatible and Enhanced.
Congure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are IDE,
RAID and AHCI. (When the option-RAID is selected, the item-ICH RAID Code Base will
appear. When the option-AHCI is selected, the item-SATA AHCI will be available.)
ICH RAID Code Base (This feature is available when the option-RAID is se-
lected)
Select Intel to enable Intel's SATA RAID rmware to congure Intel's SATA RAID set-
tings. Select Adaptec to enable Adaptec's SATA RAID rmware to congure Adaptec's
SATA RAID settings. The options are Intel and Adaptec.
SATA AHCI (This feature is available when the option-AHCI is selected)
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take
caution when using this function. This feature is for advanced programmers only.)The
options are Enabled and Disabled. If the option-Enabled is selected, the following
item will display.
Hot Plug (This feature is available when the option-Enabled is selected)
Select Enable to enable the hot plug function for the SATA devices. The options
are Enabled and Disabled.
SATA#2 Conguration
Selecting Enhanced will set SATA#2 to native SATA mode. The options
are Disabled, and Enhanced.