User`s guide

Chapter 2: Server Installation
2-7
To install the outer rails of the rack:
Attach the short bracket to the outside of the long bracket. You must align the 1.
pins with the slides. Also, both bracket ends must face the same direction.
Adjust both the short and long brackets to the proper distance so that the rail 2.
 ts snugly into the rack.
Secure the long bracket to the front side of the outer rail with two M5 screws-3.
and the short bracket to the rear side of the outer rail with three M5 screws.
Repeat steps 1-3 for the other outer rail.4.