User`s guide
Appendix B: Intel HostRAID Setup Guidelines
B-3
Using the Intel IOH-36D SATA RAID Utility Program
Creating, Deleting and Resetting RAID Volumes:
a. After the system exits from the BIOS Setup Utility, the system will automatically
reboot. The following screen appears after Power-On Self Test.
b. When you see the above screen, press the <Ctrl> and the <I> keys simultane-
ously to have the main menu of the SATA RAID Utility appear:
Note: All graphics and screen shots shown in the manual are for reference only. The
screen shots shown in the manual do not imply Supermicro's endorsement or non-
endorsement on any 3rd party's product. Your screens may or may not look exactly
the same as the graphics shown in this manual.
During the system boot-up, press the <Ctrl> and <I> keys simultaneously to 8.
run the Intel RAID Conguration Utility when prompted by the following mes-
sage: Press <Ctrl> <I> for the Intel RAID Conguration Utility.
Note: The Intel RAID Conguration Utility is only available for systems with two
or more drives installed. The Intel RAID Utility screen will not display in systems
with one drive installed. Due to each serverboard controlling two of the four SATA