User`s guide

A-1
Appendix A: BIOS POST Messages
Appendix A. BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up pro-
cedure. If a fatal error occurs, you should consult with your system manufacturer
for possible repairs.
BIOS Error Beep Codes
Beep Code Error Message Description
1 beep Refresh Circuits have been reset.
(Ready to power up)
5 short beeps + 1
long beep
Memory Error No memory detected in
the system
8 beeps Display memory
read/write error
Video adapter missing or
with faulty memory
1 continuous beep
(with the front
panel OH LED on)
System Overheat 1 continuous beep with
the front panel OH LED on
A-1 BIOS Error Beep Codes