User`s guide

C-6 NovaScale R422 Installation and User's Guide
Creating a RAID 10 (RAID 1+ RAID 0)
Select "Create RAID Volume" from the main menu and press the <Enter> key. The
following screen will appear:
Specify a name for the RAID 10 set and press <Enter>.
When RAID Level item is highlighted, use the <Up Arrow>, <Down Arrow> keys to
select RAID 10 (RAID1 + RAID0) and hit <Enter>.
When the Stripe Size is highlighted, use the <Up Arrow>, <Down Arrow> keys to
select the stripe size from 4 KB to 128 KB for your RAID 10 and hit <Enter>. The
default setting is 64 KB.
When the RAID Volume Capacity item is highlighted, enter your RAID volume capacity
and hit <Enter>. The default setting is the maximum capacity allowed.
Press <Enter> when the Create Volume item is highlighted. A warning message
displays.
When asked "Are you sure you want to create this volume (Y/N), press "Y" to create
the RAID volume, or type "N" to go back to the Create Volume menu.
1.
2.
3.
4.
5.
6.
7.
NOTE: For a server, please use a lower stripe size, and for a multimedia system, use
a higher stripe size.