User`s guide

7-2 NovaScale R422 Installation and User's Guide

7-2 Running Setup

Default settings are in bold text unless otherwise noted.

The BIOS setup options described in this section are selected by choosing the appropriate

text from the main BIOS Setup screen. All displayed text is described in this section,

although the screen display is often all you need to understand how to set the options (See

the next page).

When you ﬁ rst power on the computer, the Phoenix BIOS™ is immediately activated.

While the BIOS is in control, the Setup program can be activated in one of two ways:

By pressing <Delete> immediately after turning the system on, or

When the message shown below appears brieﬂ y at the bottom of the screen during

the POST (Power On Self-Test), press the <Delete> key to activate the main Setup

menu:

Press the <Delete> key to enter Setup

7-3 Main BIOS Setup

All main Setup options are described in this section. The main BIOS Setup screen is

displayed below.

Use the Up/Down arrow keys to move among the different settings in each menu. Use the

Left/Right arrow keys to change the options for each setting.

Press the <Esc> key to exit the CMOS Setup Menu. The next section describes in detail

how to navigate through the menus.

Items that use submenus are indicated with the  icon. With the item highlighted, press

the <Enter> key to access the submenu.

Main BIOS Setup Menu

Main Setup Features

System Time

To set the system date and time, key in the correct information in the appropriate ﬁ elds.

Then press the <Enter> key to save the data.

System Date

Using the arrow keys, highlight the month, day and year ﬁ elds, and enter the correct data.

Press the <Enter> key to save the data.

BIOS Date

This ﬁ eld displays the date when this version of BIOS was built.