User`s guide

Server Installation 2-7
2. Check the CPUs (processors)
You may have one or two processors already installed in each of the two serverboards.
Each processor needs its own heatsink. See Chapter 5 for instructions on processor and
heatsink installation.
3. Check the system memory
Your server system may have come with system memory already installed. Make sure
all DIMMs are fully seated in their slots. For details on adding system memory, refer to
Chapter 5.
4. Installing add-on cards
You can install two add-on cards to the system. See Chapter 5 for details on installing PCI
add-on cards.
5. Check all cable connections and airfl ow
Make sure all power and data cables are properly connected and not blocking the chassis
airfl ow. See Chapter 5 for details on cable connections.
Figure 2-4. Accessing the Inside of the System