User`s guide

Server Installation 2-5
Figure 2-2. Installing the Rack Rails
You should now have rails attached to both the chassis and the rack unit. The next step is to
install the server into the rack. Do this by lining up the rear of the chassis rails with the front
of the rack rails. Slide the chassis rails into the rack rails, keeping the pressure even on
both sides (you may have to depress the locking tabs when inserting). See Figure 2-3.
When the server has been pushed completely into the rack, you should hear the locking
tabs "click". Finish by inserting and tightening the thumbscrews that hold the front of the
server to the rack.