Installation guide

76 NovaScale Master 5.2-x Server Add-ons - Installation and Administrator's Guide
• WARNING:
At least one ”logical drive” or one ”physical device” is in a WARNING state.
• CRITICAL:
At least one ”logical drive” or one ”physical device” is in a CRITICAL state.
• UNKNOWN
All other types of processing errors (bad parameter, no response, and so on…).
Note:
In the case of multiple errors, the global state will be the worst one; CRITICAL > WARNING >
OK.
Output
A string composed with a global state descriptor followed, if they exist, by error states of
concerned component (controller, Logical Device, Physical Device).
global state descriptor:
The first line shows the global state. The syntax is:
GAMTT RAID [CT |PD |LD ]<GlobalStatus>
”CT ” if ”-A”.
”PD ” if ”-P”.
”LD ” if ”-L”.
state descriptor by controller
They may be present after the global state descriptor if an error exists.
The syntax is:
[ CT(Ct<Ct>) <CtrlModel> <CtrlStatus>
[{LD(Ct<Ct> Nu<Ldn>) <LDType> <LDStatus>[, ] …}]
[{PD(Ct<Ct> Ch<Ch> Tg<Tg>) <PDType> <PDStatus>[, ] …}]
…]
<GlobalStatus> worst detected status
<CtrlModel> controller model
<CtrlStatus> worst state detected for an element of this controller (LD and PD)
<Ct> controller number
<Ldn> ”logical drive” number
<LDType> ”logical drive” type: ”RAIDx” or ”JBOD”
<LDStatus> ”logical drive” status
<Ct> controller number
<Ch> ”channel” number
<Tg> target number
<PDType> ”physical device” type: ”Disk”, ”Processor”, ”Ctrl Channel”, 
<PDStatus> ”physical device” status