Installation guide

Chapter 3. NovaScale Master Server Add-ons Description
57
After edition:
• Click the OK button to validate your edition
• Or click Cancel to return to Virtual Platforms pages without changes
• Or click Delete to remove the Virtual Platform and maintain the hosts corresponding to
the VMs and the Virtualization server
•
Or click DeleteAll to remove the Virtual Platform and the hosts corresponding to the
VMs and the Virtualization server.
Note:
Edition with a Topology modification requires confirmation: a page listing all modifications to
be applied to the Topology configuration is displayed, as shown in the following figure.
Figure 3-34. Host Topology modification confirmation for VIOS Virtualization platform
If you do not agree, click the NO button to return to the platform edition page, otherwise
click the YES button to create the virtual platform.
Related VIOS Virtualization platform Objects
When a VIOS Virtualization platform is defined, related objects are automatically
generated to configure the specific Supervision linked to this type of NovaScale server. The
following table describes the objects generated during the creation of the platform.
Type Description
host LPAR As defined in the Logical Partition configuration part of the
edition page.
host Vios Host corresponding to the Virtual I/O Server as defined in
the Virtual I/O Server configuration part.
hostgroup hostgroup representing the physical platform, named
<platformName>.
manager Virtualization manager representing the management
interface, named < platformName>_IVM