Installation guide

Chapter 3. NovaScale Master Server Add-ons Description
19
3.1.2.1 Default Categories & Services (independent of OS type)
Targeted OS Model Category Service Check command
Any Any LsiCIM RAIDStatus check_LSICIM
CTRLstatus check_LSICIM_ctrl
Table 3-2. LSI CIM monitoring services
Note:
This category is based on the LSI CIM management product. This tool is a requirement for the
following LsiCIM monitoring services. Check that this tool works on the targeted OS, if you
want to monitor with it in NovaScale Master.
LsiCIM Category
RAIDstatus For NovaScale and Express5800 hosts with an LSI SCSI RAID card
managed by the LSI CIM management tool. This service checks the Host
RAID status reported by the associated LSI CIM provider.
CTRLstatus For NovaScale and Express5800 hosts with an LSI SCSI RAID card
managed by the LSI CIM management tool. This service checks the status of
a specific RAID SCSI controller reported by the associated LSI CIM provider.
3.1.2.2 check_LSICIM (any OS) Nagios command
The configurable NovaScale Master service check command syntax is:
check_LSICIM
Input
N/A
Output
See the output of the check_LSICIM shell command in Appendix A.
Default syntax for ”LsiCIM.CTRLstatus”
check_LSICIM
3.1.2.3 check_LSICIM_ctrl (any OS) Nagios command
The configurable NovaScale Master service check command syntax is:
check_LSICIM_ctrl![<ctrlname>]