User`s guide

3-20
User's Guide
The Operating System saves data, closes open applications and shuts down. Domain
hardware is powered down from the main mode to the stand-by mode. As the power-off
sequence progresses, power-off steps and domain state are displayed in the Domain
Status panel, as shown in the following table.
Power Off States
POWERING DOWN
INACTIVE
Table 10. Power-off states
Once the Power Off sequence has been successfully completed, INACTIVE is displayed in
the Domain Status panel and the Power On button becomes accessible.
For a detailed view of the Power Off sequence, click Powering View in the Toolbar. See
Viewing Domain Powering Sequences, on page 3-32.
Note:
If an error message is displayed in the Domain Status panel, the Power Off sequence has
failed. See What To Do if an Incident Occurs, on page 3-42.