User`s guide

3-19
Managing Domains
Once the Power Off sequence has been successfully completed, INACTIVE is displayed in
the Domain Status panel and the Power On button becomes accessible.
For a detailed view of the Power Off sequence, click Powering View in the Toolbar. See
Viewing Domain Powering Sequences, on page 3-32.
5. Repeat Steps 2 to 4 for each domain to be powered down.
Note:
If an error message is displayed in the Domain Status panel, the Power Off sequence has
failed. See What To Do if an Incident Occurs, on page 3-42.
Powering Off Multiple Domains
To power off more than one domain from the PAM Domain Manager:
1. Click Domain Manager to open the Control pane.
2. Click Multiple Power. The Multiple Power Domains On/Off dialog opens.
Deselect All Cancels all selected operations.
Power On All Powers on all INACTIVE domains.
Power Off All Powers off all RUNNING domains.
Force Power Off All Forcibly powers off all RUNNING or HUNG domains.
Deselect Cancels the selected operation for this domain.
Power On Powers on this domain if INACTIVE.
Power Off Powers off this domain if RUNNING.
Force Power Off Forcibly powers of this domain if RUNNING or HUNG.
Execute Applies all selected operations.
Cancel Cancels all selected operations.
Figure 43. Multiple power dialog - quadri-domain example
3. Click Power Off All → Execute or select the required domain Power Off radio buttons and
click Execute to simultaneously power off the selected RUNNING domains and associated
hardware components.