User`s guide

2-14
User's Guide
8. Click Power On All → Execute to simultaneously power on the domains and associated
hardware components.
Figure 34. Multiple power dialog - example with 4 domains
Note:
Domains can also be powered on sequentially from the Control pane:
• Select a domain in the Control pane and click Power On to power up the domain and
associated hardware components. Repeat this step for each domain in the Control pane.
9. Follow the power-on steps displayed in the Domain State boxes, until RUNNING is
displayed in all Domain State boxes.
Figure 35. Domain state - example with 4 domains
10.Toggle the local / integrated console from the PAP unit display to the first domain display.
See Toggling the Local / Integrated Console Display, on page 2-9.
11.Wait for the Operating System to load completely. The domain is now fully functional.
12.Toggle the local / integrated console from this domain display to the next domain
display.
13.Wait for the Operating System to load completely. The domain is now fully functional.
14.Repeat Steps 12 and 13 for each domain.
15.Check the Operating System environment pre-installed on each domain.