User`s guide
2-11
Getting Started
7. Follow the power-on steps displayed in the Domain State box, until RUNNING is
displayed.
Figure 31. Domain state
8. Toggle the local / integrated console from the PAP unit display to the server display. See
Toggling the Local / Integrated Console Display, on page 2-9.
9. Wait for the Operating System to load completely. The domain is now fully functional.
10.Check the Operating System environment pre-installed on the domain.
11.As Customer Administrator, you can now prepare each domain for remote access via the
Enterprise LAN and/or via the Web. See Preparing Server Domains for Remote Access
via the Enterprise LAN, on page 2-16 and Preparing Server Domains for Remote Access
via the Web, on page 2-18.
Powering Down the NovaScale 5xx5 SMP Server Domain
Note:
If an error dialog box appears during this sequence, see Chapter 3. Managing Domains.
1. Shut down the Operating System to power down the domain to the stand-by mode.
2. Toggle the local / integrated console to the PAP unit display. INACTIVE is displayed in the
Domain State box and the Power ON button is accessible.
Note:
For further details about the Power ON / OFF sequences, see Powering ON a Domain, on
page 3-14 and Powering OFF a Domain, on page 3-18.
• If the same PAP unit administers more than one server, all servers can be powered on
simultaneously as follows:
a. Click Multiple Power. The Multiple Power Domains On/Off dialog opens.
b. Click Power On All → Execute to power on the servers and associated hardware
components.
• For further details about the Power ON / OFF sequences, see Powering ON a Domain and
Powering OFF a Domain in the User's Guide.