User`s guide

2-3
Getting Started
Connecting to the PAM Web Site from a Remote Computer
The PAM Software utility can be accessed from any PC running Microsoft Windows with the
Internet Explorer (6 or later) browser installed and/or from any workstation running Linux
with the Mozilla (1.7 or later) or Firefox (1.0) browsers installed.
Important:
Before connecting to PAM from a remote computer, you are advised to disconnect from your
local Windows session on the PAP unit by clicking Start → Log Off.
If Pop-up Blocker is turned on in your Web Browser, you MUST add the PAM Web site to the
list of allowed sites.
Do NOT use the Mozilla or Firefox browsers on the PAP unit.
Enabling Remote Access to the PAM Web Site with Internet Explorer, Mozilla, or Firefox
1. From the remote computer, configure the browser to connect directly to the PAM Web site
by entering the PAM Web site URL defined during the PAP installation procedure in the
Home Page Address field:
http://<PAPname>/pam
(where <PAPname> is the name allocated to the PAP unit during setup).
2. Launch the browser to connect directly to the PAM web site.
3. When prompted, enter the appropriate Administrator or Operator User Name and
Password. The PAM home page appears.