User`s guide

5-155
Tips and Features for Administrators
7. If required, click Advanced to access advanced filtering criteria. The advanced event
message filtering criteria chart is displayed.
Figure 181.New Filter configuration page - advanced event message filtering criteria
table
8. When you have finished configuring your event filter, click Create.
9. Repeat steps 3 to 8 for each new event filter you want to create.
10.Click Close to save changes. The new filter appears in the Filters list.
Editing Event Filter Attributes
1. Click Configuration Tasks → Events → Filters in the PAM tree. The filter configuration page
opens with the list of existing event message filters. See Figure 180 above.
2. Select the required filter from the event message filter list.
3. Click Edit in the toolbar to modify filter attributes.
4. Click OK to save changes.
Deleting an Event Filter
Important:
Before deleting an event filter, all the event subscriptions using that filter must either be
modified to use another filter, or deleted.
1. Click Configuration Tasks → Events → Filters in the PAM tree. The filter configuration page
opens with the list of existing event message filters. See Figure 179 above.
2. Select the required filter from the event message filter list.
3. Click Delete in the toolbar.
4. Click OK to confirm the deletion of the selected event filter.