User`s guide

5-122
User's Guide
20.Double-click the D2 EFI LUNs field. The Select EFI LUN dialog opens, allowing you to
choose the required EFI Boot LUN from the list of available LUNs.
As the selected EFI LUN is a Local LUN, the Status icon turns green.
21.Double-click the D1 Data LUNs field. The Select Data LUN dialog opens, allowing you to
choose the required Data LUNs from the list of available LUNs.
22.Select the required Data LUNs from the list of available LUNs and click Add to move the
selected Data LUNs to the Data LUNs selected list.
Figure 168.Select Data LUN dialog - example 4
23.Click OK to return to the Scheme Management dialog. Data LUN set is now displayed in
the Data LUNs field.
The Status icon remains red and the No Link icon
is displayed. You must now link the
selected EFI and Data LUNs to the Fibre Channel Host you want to use to access these
LUNs.
24.Repeat Steps 21 to 23 for D2 Data LUNs.
As the selected Data LUN is a SAN LUN, the Status icon turns red and the No Link icon
is displayed. You must now link the selected Data LUN to the Fibre Channel Host you
want to use to access these LUN.