User`s guide

5-109
Tips and Features for Administrators
22.Select the required Data LUNs from the list of available LUNs and click Add to move the
selected Data LUNs to the Data LUNs selected list.
Figure 158.Select Data LUN dialog - example 2
23.Click OK to return to the Scheme Management dialog. Data LUN set is now displayed in
the Data LUNs field.
The Status icon remains red and the No Link icon
is displayed. You must now link the
selected EFI and Data LUNs to the Fibre Channel Host you want to use to access these
LUNs.
24.Repeat Steps 21 to 23 for D2 Data LUNs.
As the selected Data LUN is a SAN LUN, the Status icon turns red and the No Link icon
is displayed. You must now link the selected Data LUN to the Fibre Channel Host you
want to use to access this LUN.