User`s guide

5-108
User's Guide
16.Select the required identity from the list of available identities and click OK to return to the
Scheme Management dialog. The selected identity is now displayed in the Domain
Identities field.
17.Repeat Steps 10 to 16 for the empty cell of the P2 line and the Domain Identities column.
18.Double-click the D1 EFI LUNs field. The Select EFI LUN dialog opens, allowing you to
choose the required EFI Boot LUN from the list of available LUNs.
Figure 156.Select SAN EFI LUN dialog - example 3
19.Select the required EFI Boot LUN from the list of available SAN LUNs and click OK to
return to the Scheme Management dialog. The selected LUN is now displayed in the EFI
LUNs field.
As the selected EFI LUN is a SAN LUN, the Status icon remains red and the No Link icon
appears.
20.Double-click the D2 EFI LUNs field. The Select EFI LUN dialog opens, allowing you to
choose the required EFI Boot LUN from the list of available Local LUNs.
Figure 157.Select Local EFI LUN dialog - example 3
As the selected EFI LUN is a Local LUN, the Status icon turns green.
21.Double-click the D1 Data LUNs field. The Select Data LUN dialog opens, allowing you to
choose the required Data LUNs from the list of available LUNs.