User`s guide

5-62
User's Guide
Editing LUNs
Important:
Reserved for systems connected to a Storage Area Network (SAN).
Please contact your Bull Sales Representative for sales information.
Notes:
• A LUN CANNOT be edited if it is allocated to a Scheme.
• The NVRAM button is NOT ACCESSIBLE if no NVRAM variables are available for the
selected LUN.
If required, you can modify the EFI / Data LUN names, description, NVRAM variables,
and/or change a Data LUN into an EFI LUN or vice-versa.
To edit a LUN:
1. Click Configuration Tasks → Domains → LUNs in the PAM tree to open the Logical Units
page.
2. Select the LUN you want to modify from the lists of available LUNs and click Edit LUN to
open the Edit LUN dialog.
Figure 124.Edit LUN dialog
3. Modify LUN parameters as required:
a. Enter a new name in the Name field if you want to change the LUN name.
b. Enter a new description in the Description field if you want to change the LUN
description.
c. Select the EFI LUN checkbox if you want to change a Data LUN into an EFI LUN.
d. Deselect the EFI LUN checkbox if you want to change an EFI LUN into a Data LUN.
4. Click OK to apply changes.