User`s guide

5-60
User's Guide
Declaring Local LUNs
When you create a new LUN via the software delivered with your local storage subsystem,
you must also declare this new LUN by using the PAM Declare Local LUN command.
Note:
This command CANNOT be used to declare new SAN LUNs.
To update the list of available local LUNs:
1. Create the required LUNs from the utility delivered with the storage subsystem(s).
2. Click Configuration Tasks → Domains → LUNs in the PAM tree to open the Logical Units
page.
3. Click Decclare local LUN to open the Declare Local LUN dialog.
Figure 122.Declare Local LUN dialog
4. Use the Central Subsystem drop-down menu to select the Central Subsystem to which the
LUN is connected.
5. Use the Available Cell drop-down menu to select the cell to which the LUN is connected.
6. Enter the name given to the LUN in the LUN Name field with a brief description.
7. Select the EFI LUN or DATA LUN radio button, as required and click Create. The list of
available local LUNs is updated.