User`s guide

5-59
Tips and Features for Administrators
Updating SAN LUN Lists
Important:
Reserved for systems connected to a Storage Area Network (SAN).
Please contact your Bull Sales Representative for sales information.
When new LUNs are added to / removed from your Storage Area Network, they can be
automatically added to / removed from the list of available LUNs by using the PAM SAN
Update command, which allows you to update the lists of available LUNs on the SAN at any
time.
Notes:
• This command CANNOT be used to update the lists of local LUNs.
• This command is automatically performed when a PAM session is launched on the PAP
unit and when a disk subsystem change takes place.
• When a new LUN is found, PAM considers it as a Data LUN by default. If you want to
change this LUN into an EFI Boot LUN, use Edit LUN.
To update the lists of available SAN LUNs:
1. Create the required LUNs from the utility delivered with the storage subsystem(s).
2. Click Configuration Tasks → Domains → LUNs in the PAM tree to open the Logical Units
page.
3. Click SAN Update. A confirmation dialog opens.
4. Click Yes to update the lists of available LUNs. The SAN Update Progress Bar is
displayed.
Figure 121.SAN Update progress bar
Once the process is complete, the LUN lists are updated to reflect configuration changes.