User`s guide

5-58
User's Guide
• Data LUNs, on which data can be stored, are listed at the bottom of the pane.
Command Bar
SAN Update Update the lists of SAN LUNs.
Edit LUN Modify the LUN name, description, and change a Data LUN into
an EFI LUN and vice-versa.
Rename LUN Modify the LUN name.
NVRAM Clear, load and save EFI Boot LUN NVRAM variables.
Declare Local LUN Declare a new local LUN.
Delete Local LUN Delete a non-allocated local LUN.
LUN List
Name LUN name.
LUN Number Number allocated to the LUN.
Type RAID configuration type.
RAID1 is recommended for EFI LUNs and RAID5 for Data LUNs.
Capacity LUN storage capacity.
Loaded Yes
LUN used by a currently loaded domain.
No
LUN not used by a currently loaded domain.
Allocated Yes
LUN allocated to a domain within a Domain Configuration
Scheme.
No
LUN not allocated to a domain within a Domain Configuration
Scheme.
Description Description, indicating LUN location (Central Subsystem name
and Cell and/or storage subsystem name).
Figure 120.Logical Units page - servers connected to a SAN