User`s guide

5-57
Tips and Features for Administrators
Managing Logical Units (Servers Connected to a SAN)
Important:
Certain features described below are only available if you are connected to a Storage Area
Network (SAN).
Please contact your Bull Sales Representative for sales information.
What You Can Do
• Update SAN LUN Lists
• Declare Local LUNs
• Delete Local LUNs
• Edit LUNs
• Rename LUNs
• Clear, Load, Save NVRAM Variables
Note:
EFI LUNs and Data LUNs must be created from the utility delivered with the storage
subsystem. See Configuring System and Data Disks, on page 5-5.
To open the Logical Units management page:
1. Click Configuration Tasks -> Domains -> LUNs in the PAM tree.
1 SAN storage subystem 2 Local storage subsystem
Notes:
• EFI Boot LUNs, on which Operating Systems are installed, are listed at the top of the pane.