User`s guide

5-56
User's Guide
Updating the Local LUN Lists
The lists of available local LUNs are automatically created when a Central Subsystem is
declared and/or added. You can update the lists of available local LUNs at any time to
reflect configuration changes.
To update the local LUN lists:
1. Click Configuration Tasks → Domains → LUNs in the PAM tree to open the Logical Units
page.
2. Click Update. When requested, click OK to confirm. The new LUN lists are displayed in
the Logical Units page.
Clearing, Loading, Saving NVRAM Variables
NVRAM variables are available for each EFI boot LUN. According to requirements, these
variables can be cleared, saved and/or loaded.
1. Click Configuration Tasks → Domains → LUNs in the PAM tree to open the Logical Units
page.
2. Select the required LUN from the list of available EFI Boot LUNs and click NVRAM. The
NVRAM Variables dialog opens.
a. Click Clear to clear displayed NVRAM variables. When requested, click OK to
confirm.
b. Click Save to save NVRAM variables for the selected EFI Boot LUN (currently used by
an active domain). When requested, enter the name of the file to which NVRAM
variables are to be saved. The NVRAM variables file is stored in the PAM SiteData
directory.
c. Click Load to load previously saved NVRAM variables from the PAM SiteData
directory.