User`s guide

5-55
Tips and Features for Administrators
Managing Logical Units (Servers Not Connected to a SAN)
Your server is delivered with default EFI Boot LUNs. You can use the software delivered with
your storage subsystem to define data LUNs.
What You Can Do
• Clear, Load, Save NVRAM Variables
• Update the Local LUN Lists
To open the Logical Units management page:
1. Click Configuration Tasks -> Domains -> LUNs in the PAM tree.
Name Default LUN name
EFI EFI
This LUN is a boot LUN.
DATA
This LUN is a data LUN.
In Use in Domain Yes
This LUN is used by a domain currently loaded in the Domain Man-
ager Control pane.
No
This LUN is not used by a domain currently loaded in the Domain
Manager Control pane.
In Use in Scheme Yes
This LUN has been allocated to a domain within a Domain Configu-
ration Scheme.
No
This LUN has not been allocated to a domain within a Domain Con-
figuration Scheme.
NVRAM Yes
NVRAM variables have been saved for this LUN.
No
NVRAM variables have not been saved for this LUN.
Description Default description, indicating LUN location (Central Subsystem
name and Cell).
Figure 119.Logical Units page - servers not connected to a SAN