User`s guide

5-45
Tips and Features for Administrators
23.Select the Redundant checkbox if you want to define two links to the LUN.
Note:
If you select the Redundant mode, you will be informed that dedicated software is
required to enable this mode and you will be requested to confirm your choice.
24.Click Set Primary Link to define the main access path to the SAN. The Select HBA dialog
opens, allowing you to select the domain PCI slot you want to use to access the LUN.
Figure 113.Select an HBA dialog
25.Select the PCI slot containing the HBA to be used as the primary link to the SAN and click
OK. The primary link is now set.
26.Where applicable, click Set Secondary Link to define the backup access path to the SAN.
Select the PCI slot containing the HBA to be used as the secondary link to the SAN and
click OK. The secondary link is now set.
27.Click OK → Apply to return to the Scheme Management dialog. The Status icon turns
green and the Linked icon
appears.
28.Repeat Steps 11 to 27 for the other domains. All Status icons turn green.