User`s guide

4-48
User's Guide
Checking SNMP Settings
If you are requested to check SNMP settings, IP address, or server name for an event
subscription:
1. From the PAM Tree, click Configuration Tasks → Events → Channels and check that the
SNMP Channel is enabled.
2. Click Subscriptions to view configured subscriptions. Channel type is indicated in the
Channel column.
3. Select the required SNMP Channel subscription from the list and click Edit to view /
modify SNMP settings.
Checking Autocall Settings
If you are requested to check Autocall settings:
1. From the PAM Tree, click Configuration Tasks -> Autocalls and check that the Enable
Autocalls checkbox is selected.
2. Check dispatch modes and corresponding settings.
Checking PAM Version
If you are requested to check PAM version:
From the PAM Tree, click PAP to display the PAP Unit Information page. PAM version is
displayed at the top of the page.
Checking MAESTRO Version
If you are requested to check MAESTRO version:
From the PAM Tree, click Hardware Monitor → PMB to open the PMB Status page. Click the
FIRMWARE tab to view MAESTRO version.
Checking Writing Rules
If you are requested to check writing rules, see PAM Writing Rules.
Powering OFF/ON a Domain
If you are requested to Power OFF/ON or Force Power OFF a domain, ensure that you have
saved data and closed open applications.
See Managing Domains, on page 3-1.
Rebooting the PAP Application
If you are requested to reboot the PAP application:
1. From the Microsoft Windows home page, click Start → Programs → Administrative Tools
→ Component Services.
2. From Component Services, click Console Root → Component Services → Computers → My
Computer → COM+ Applications → PAP.
3. Right click PAP to open the shortcut menu. Click Shutdown.
4. Activate the required PAM version to reboot the PAP application.
See Deploying a New PAM Release, on page 5-23 and
Activating a PAM Version, on page 5-24.