User`s guide

4-30
User's Guide
Excluding / Including Sidebands
The sidebands route reset and error logs. If a sideband is faulty, you can logically exclude it
to ensure correct server operation until replaced. Once the fault has been repaired, you can
logically include the excluded sideband.
To logically exclude / include a sideband:
1. From the PAM Tree pane, click Configuration Tasks → Ring Exclusion to open the Control
pane.
2. Select the Sideband tab to display sideband configuration.
Figure 84. Ring exclusion control pane - sideband tab
3. Select the required sideband by clicking the corresponding icon or table entry.
4. Click Save in the Tool bar to logically exclude / include the sideband at the next
power-on.
Note:
The legend at the bottom of the Control pane explains different sideband states.
In the above figure, no exclusions have been requested / applied.