User`s guide

4-28
User's Guide
3. Select the required clock(s) by clicking the corresponding icon or table entry.
4. Click Save in the Tool bar to logically exclude / include the clock at the next power-on.
Note:
The legend at the bottom of the Control pane explains different clock states.
In the above figure, no exclusions have been requested / applied.
Excluding / Including SPS
For high flexibility, availability and optimum performance, each CSS module is equipped
with two SPS for inter-module communication (one on each Core unit MSX board). Only one
inter-module communicaiton link is required per domain. If an SPS is faulty, you can logically
exclude it to ensure correct server operation until replaced. Once the fault has been
repaired, you can logically include the excluded SPS.
To logically exclude / include an SPS:
1. From the PAM Tree pane, click Configuration Tasks → Ring Exclusion to open the Control
pane.
2. Select the SPS tab to display SPS configuration.
Figure 82. Ring exclusion control pane - SPS tab
3. Select the required SPS by clicking the corresponding icon or table entry.
4. Click Save in the Tool bar to logically exclude / include the SPS at the next power-on.
Note:
The legend at the bottom of the Control pane explains different SPS states.
In the above figure, no exclusions have been requested / applied.