User`s guide

4-18
User's Guide
Power Tab
The Power tab gives access to power status data for the hardware element, indicating main
and standby power state and/or power-specific faults for each converter. See Displaying
Functional Status, on page 4-7.
Once connected to the Customer's site power supply, server hardware elements initialize to
the stand-by mode. Server hardware elements initialize to the main mode when the domain
is powered up.
Nominal values
Measured values
Figure 72. Converter power status details (example)
Indicator Status Explanation
Green
MAIN POWER ON
Hardware element main / standby power is on.
Green
STANDBY POWER ON
Hardware element main / standby power is on.
White
MAIN POWER OFF
Hardware element main / standby power is off.
White
STANDBY POWER OFF
Hardware element main / standby power is off.
Red
MAIN POWER
FAULT/FAILED
PAM software has detected 1 or more main / standby
power fault(s) on this hardware element.
Red
STANDBY POWER
FAULT/FAILED
PAM software has detected 1 or more main / standby
power fault(s) on this hardware element.
Gray
MAIN POWER
MISSING/UNKNOWN
PAM software cannot read main / standby power status
on this hardware element.
Gray
STANDBY POWER
MISSING/UNKNOWN
PAM software cannot read main / standby power status
on this hardware element.
Table 22. Power tab status indicators