Installation guide

2-44
Installation Guide
Connecting the Server to the Enterprise LAN
Important:
Extra cable lengths of 1.5 meters are required for maintenance. These extra cable lengths
must be absorbed in the plenum space under the cabinet.
At the Customer's request, server domains can be connected to the Enterprise LAN via the
IOL board for remote operation.
LAN port
Figure 48. 10/100/1000 Mb/s LAN port
To connect server domain(s) to the Enterprise LAN:
NovaScale 5xx5 Partitioned Servers
9. Locate the corresponding IOL board:
MyOperations-1: Module0, IOC0, IOL0
MyOperations-2: Module0, IOC1, IOL1
MyOperations-3: Module1, IOC0, IOL0
MyOperations-4: Module1, IOC1, IOL1
MyOperations-5: Module2, IOC0, IOL0
MyOperations-6: Module2, IOC1, IOL1
MyOperations-7: Module3, IOC0, IOL0
MyOperations-8: Module3, IOC1, IOL1
10.Locate the Ethernet 10/100/1000 Mb/s LAN RJ45 ports on each IOL board.
11.Connect the network cables equipped with an RJ45 connector to the IOL board LAN
ports. Network connections are detected automatically.
12.Carefully route network cables through the cable inlet at the base of the cabinet.