Installation guide

2-42
Installation Guide
Linux RedHat Setup
1. Select the first Linux RedHat domain in the Control pane scheme and click Power On to
power up the domain and associated hardware components.
2. Toggle the local / integrated console from the PAP unit display to MyOperations-1 or
MyOperations-2 or MyOperations-3 or MyOperations-4 display, as required. See
Toggling the Local / Integrated Console Display, on page 2-12.
3. Check Regional, Date/Time, and Time Zone settings.
4. Place the Linux RedHat CD-Rom in the corresponding drive. Setup is completed via the
Webmin administration tool:
a. Enter the Webmin URL:
http://<localhost>:10000. The Login to Webmin dialog box opens.
b. Enter the default User Name and Password, followed by Enter. The Webmin home
page opens.
User Name
root
Password root
c. Click the Networking icon to open the Networking main page.
d. Click Network Configuration → Network Interfaces. In the Interfaces Activated at Boot
Time field, click Add a new interface to open the Create Bootup Interface configuration
page. Complete the required fields with the data supplied by the Customer and click
Create.
e. From the Interfaces Activated at Boot Time field, select the new interface. The Edit
Bootup Interface page opens. Check settings and click Save and Apply → Return to
network configuration.
f. Click Routing and Gateways to open the Routing and Gateways configuration page.
Complete the required fields with the data supplied by the Customer and click Save →
Return to network configuration.
g. Click DNS Client to open the DNS Client Options configuration page. Complete the
required fields with the data supplied by the Customer and click Save → Return to
network configuration.
h. Click Host Addresses -> Add a new host address to open the Host and Addresses
configuration box. Complete the required fields with the data supplied by the
Customer and click Create -> Return to host addresses list -> Return to network
configuration -> Return to index -> System -> Bootup and Shutdown to create a new
bootup and shutdown action.
i. From the action list, select Network to display the Edit Action page and click -> Restart
Now -> Return to action -> Return to bootup and shutdown actions -> Return to index
-> Log Out to exit Webmin. Once setup is complete, the network is activated.
5. Shut down the domain and associated hardware components by selecting the Shut Down
command in the Start Menu.
6. Toggle the local / integrated console from the domain display to the PAP unit display. See
Toggling the Local / Integrated Console Display, on page 2-12.
7. Update Domain Identity Management Parameters:
a. From the Customer Administrator PAM Tree, click Domains → Identities.
b. Select the corresponding Domain Identity and click Edit. The Edit Identity dialog
opens.
c. Complete the Network Name, IP Address, and URL fields with the data entered during
the setup completion procedure.
8. Repeat steps 1 to 7 for each pre-installed Linux Redhat instance.