Installation guide

2-39
Setup Procedure
Novell SuSe Setup
1. Select the Linux SuSe domain in the Control pane scheme and click Power On to power
up the domain and associated hardware components.
2. Toggle the local / integrated console from the PAP unit display to the domain display. See
Toggling the Local / Integrated Console Display, on page 2-12.
3. Check Regional, Date/Time, and Time Zone settings.
4. Place the Linux SuSe CD-Rom in the drive. Setup is completed via the Yast Control Center
administration tool:
a. Type the default User Name and Password, followed by Enter.
User Name
root
Password root
b. Enter yast2 (graphical mode) or yast (non-graphical mode) to open the Yast Control
Center main page.
Note:
Use the <Tab> and <Arrow> keys to navigate through the menus.
c. Click Network/Basic → Network Card Configuration.
d. Select the required network card and click Configure.
e. From the Network Address Setup page, select the setup method and complete the
required fields with the data supplied by the Customer.
f. From the Details settings area, click Host name and name server. Complete the
required fields and click Next.
g. From the Details settings area, click Routing. Complete the required fields and click
Next to return to the Network Card Configuration page. Your network card is
displayed in the Already configured devices area.
h. Click Close to exit Yast Control Center. Once setup is complete, the network is
activated.
5. Shut down the domain and associated hardware components by selecting the Shut Down
command in the Start Menu.
6. Toggle the local / integrated console from the domain display to the PAP unit display. See
Toggling the Local / Integrated Console Display, on page 2-12.