Installation guide

2-34
Installation Guide
Enabling Remote Access to iSM on the Client Computer
FDA 1x00 FC and FDA 2x00 FC subsystems are delivered with iStorage Manager (iSM) for
integrated monitoring and centralized management.
The iSM Server / Client utility is installed on the PAP Unit desktop. The Customer can install
iSM Client on any standard PC running under Microsoft Windows (2000 or later).
To enable remote access to iSM:
1. Insert the iSM Client setup CD-Rom in the client computer.
2. Run the CLIENT\2000\ISMCE211.EXE program to launch the setup wizard which guides
you through the iSM Client configuration procedure.
3. When you are requested to select Setup Type, click basic + extended function → Next.
4. Once setup is complete, launch iSM Client to connect to iSM Server. A dialog box
appears requesting you to set the environment for iSM Client.
5. From the iSM Client menu, click File -> Environment Settings to open the Server Settings
page.
6. In the IP Address field, enter the PAP unit IP address allocated during the PAP unit setup
process. See Completing PAP Unit Configuration, on page 2-24.
7. Click OK to establish the connection.
8. When requested enter the User Name and Password and click OK. See Changing the
iStorage Manager User Name and Password, on page 2-22.