Installation guide

2-31
Setup Procedure
7. If FTP dispatch mode is selected, complete the FTP Settings fields with the following
information:
Field
Explanation Value
Server name Remote Maintenance Center server IP address 127.0.0.1
Server port Default server port 21
Target directory Default server directory /autocall
Login Declared authorized user name X
Password Declared authorized user password X
Passive mode FTP connection mode check box
8. If a modem connection is to be used:
a. From the PAP Unit Microsoft Windows desktop, configure the dial-up connection
(Control Panel → Phone and Modem Options).
b. From the PAM Autocalls Control Pane, select the Use modem connection checkbox.
c. Use the Connection name drop-down menu to select the required modem connection.
d. Complete the User name and Password fields with the declared authorized user name
and user password.
9. Return to the PAP Unit Microsoft Windows desktop to complete remote maintenance setup
as explained in the BULL Remote Maintenance Guide.
Note:
Connection of the USB modem required for the Autocall feature is explained in Connecting
the USB Modem and External Devices, on page 2-45.