Installation guide

2-23
Setup Procedure
Changing the [e-mail] Password
FDA 1x00 FC and FDA 2x00 FC subsystems are delivered with [e-mail] software for
integrated monitoring and centralized management.
The [e-mail] Server / Client utility is installed on the PAP Unit desktop. The Customer can
install [e-mail] Client on any standard PC running under Microsoft Windows (2000 or later).
Before using [e-mail], the Customer is advised to replace the factory default sanadmin User
Password.
Note:
The default sanadmin User Name CANNOT be changed.
To change the [e-mail] sanadmin User Password:
1. From the PAP Unit Microsoft Windows desktop, click:
Start → Programs → [e-mail].
2. Enter the Configuration → Set Password menu.
3. Select the sanadmin user.
4. Type your new password in the New Password field.
5. Confirm your new password by retyping it in the Confirm Password field.
6. Click OK to save changes.
Note:
Please refer to the [e-mail] documentation delivered with the server for further details.