Installation guide

2-22
Installation Guide
Changing the iStorage Manager User Name and Password
FDA 1x00 FC and FDA 2x00 FC subsystems are delivered with iStorage Manager (iSM)
software for integrated monitoring and centralized management.
The iSM Server / Client utility is installed on the PAP Unit desktop. The Customer can install
iSM Client on any standard PC running under Microsoft Windows (2000 or later).
Before using iSM, the Customer is advised to replace the factory default User Name and
Password.
To change the iStorage Manager User Name and Password:
1. From the PAP Unit Microsoft Windows desktop, click:
Start → Programs → NEC Storage Manager Server → Setting Utility.
2. Select the Users tab. The default User Name and User Level is displayed in the User List.
Default User
Name
Administrator
Default User Level L3
Default Password administrator
3. Select Administrator from the User List and click Edit to open the User - Edit dialog box.
4. Change the User Name and Password and check that the L3 radio button is highlighted.
5. Click OK.
6. A dialog box requests you to restart iSM to apply changes. Click Yes.
7. From the PAP Unit Microsoft Windows desktop, click:
Start → Programs → Administrative Tools → Services.
8. Select NEC Storage Manager → Action → Stop to stop iSM.
9. Click Action → Start to restart iSM. Changes are applied.
Note:
Please refer to the iSM documentation delivered with the server for further details.