Installation guide

2-21
Setup Procedure
12.Repeat Steps 10 and 11 for each domain.
13.Check the Operating System environment pre-installed on each domain.
14.Shut down each Operating System to power down the corresponding domain to the
stand-by mode.
15.Toggle the local / integrated console to the PAP unit display. INACTIVE is displayed in the
Domain State boxes and the Power ON button is accessible for each domain.
Note:
For further details about the Power ON / OFF sequences, see Powering ON a Domain and
Powering OFF a Domain in the User's Guide.
Shutting Down / Restarting the Server
1. From the PAM home page, click File → Close to return to the Microsoft Windows desktop.
2. Shut down the PAP unit by selecting the Shut Down command in the Start Menu.
3. Request the Customer to turn the power supply circuit breakers OFF.
4. Request the Customer to turn the power supply circuit breakers ON.
The Platform Management Board (PMB) in each CSS module automatically powers up to
the standby mode (48V) and the Platform Administration Processor (PAP) unit
automatically boots Microsoft Windows software.