Installation guide

2-20
Installation Guide
1
Functional status icon
2 CSS availability status indicator (GREEN)
3 Operating system type
Figure 36. Domain Manager Control pane - example with 4 domains
5. Click Multiple Power. The Multiple Power Domains On/Off dialog opens.
6. Click Power On All → Execute to simultaneously power on the domains and associated
hardware components.
Figure 37. Multiple power dialog - example with 4 domains
Note:
Domains can also be powered on sequentially from the Control pane:
• Select a domain in the Control pane and click Power On to power up the domain and
associated hardware components. Repeat this step for each domain in the Control pane.
7. Follow the power-on steps displayed in the Domain State boxes, until RUNNING is
displayed in all Domain State boxes.
Figure 38. Domain state - example with 4 domains
8. Toggle the local / integrated console from the PAP unit display to the first domain display.
See Toggling the Local / Integrated Console Display, on page 2-12.
9. Wait for the Operating System to load completely. The domain is now fully functional.
10.Toggle the local / integrated console from this domain display to the next domain
display.
11.Wait for the Operating System to load completely. The domain is now fully functional.