Installation guide

1-10
Installation Guide
Installing Stoppers
Four stoppers, complete with captive screws, are supplied with each CSS module and must
be installed once shipping brackets have been removed.
The two narrow stoppers are installed on the front cabinet frame and the two deep stoppers
are installed on the rear cabinet frame.
1. From the front of the cabinet, align the 2 narrow stoppers (A) with the front of the frame
and tighten into place.
Figure 4. Installing front stoppers
2. From the rear of the cabinet, align the 2 deep stoppers (B) with the front of the frame and
tighten into place.
Figure 5. Installing rear stoppers.
Repeat Steps 1 and 2 for each CSS module in the cabinet.