Installation guide

1-9
Delivery
Removing CSS Module Brackets and Installing Stoppers
Each Bull NovaScale Server CSS module is equipped with two yellow shipping brackets at
the front and two yellow shipping brackets at the rear of the cabinet. Once the server has
been installed and correctly secured, you must remove all shipping brackets and install the
stoppers supplied in the Open Me First box.
Removing CSS Module Shipping Brackets
11.From the front of the cabinet, loosen and remove the 2 shipping brackets on either side of
the CSS module / cabinet with the 8 mm hex wrench.
Figure 2. Removing front shipping brackets
12.From the rear of the cabinet, loosen and remove the 2 shipping brackets on either side of
the CSS module / cabinet with the 8 mm hex wrench.
Figure 3. Removing rear shipping brackets.
Repeat Steps 11 and 12 for each CSS module in the cabinet.
Important:
Take care to store shipping brackets and fittings with other packing items.