Installation guide

2-51
Setup Procedure
Initializing the PAP Unit Backup Disk
The PAP Unit is delivered with two RAID 1 (hard mirror) disks installed and a third spare disk.
Now that the server has been installed and is operational and the PAP Unit and PAM
software have been customized, you should now initialize the backup disk.
In the event of disk failure or logical data corruption, the backup disk can be easily used to
repair the disk hard mirror.
The Adaptec Storage Manager utility is used to configure and monitor PAP Unit disks.
1. From the PAP Unit desktop, launch Adaptec Storage Manager, as shown in the following
figure.
Figure 51. Launching Adaptec Storage Manager