User`s guide

2-9
Getting Started
Powering Down the Domain
1. Shut down the server domain from the Operating System.
2. Toggle the local / integrated console from the server display to the PAP unit display. See
Toggling the Local / Integrated Console Display, on page 2-6.
Note:
For further details about the Power OFF sequence, see Powering OFF the Domain, on
page 3-4.
Note:
If required, the server domain can also be powered OFF from the PAM Domain Manager. If
the Operating System is configured to accept a PAM Power OFF command, it will
automatically save data, close open applications, and shut down the server domain:
1. Toggle the local / integrated console from the server display to the PAP unit display. See
Toggling the Local / Integrated Console Display, on page 2-6.
2. From the PAM Tree, click Domain Manager to open the Control pane. If the server
domain is powered up, RUNNING is displayed in the Domain Status panel and the
Power OFF button is accessible.
3. Click Power OFF. The server domain and associated hardware components will be
powered down to the stand–by mode.