User`s guide

C-40
User’s Guide
Description
2B2B3325 <signal name> ACPI signal deasserted
2B2B3326 FRU connected
2B2B3327 FRU isolated
2B2B3328 Cabinet door opened
2B2B3329 Cabinet door closed
2B2B3330 Cabinet intrusion detector cable is connected
2B2B3331 Cabinet intrusion detector cable is disconnected
2B2B3332 Battery failed
2B2B3333 I2C loop back error
2B2B3334 Clock frequency unknown
2B2B3335 PHPB fault
2B2B3400 Device missing.
2B2B3401 Device failed.
2B2B3402 SM bus access denied.
2B2B3403 SM bus failed.
2B2B3405 I2C network failed.
2B2B3406 Chipset command aborted
2B2B3407 Chipset status: busy
2B2B3408 Chipset status: error
2B2B3409 I2C loop back error
2B2B3500 Domain already powered on
2B2B3501 Domain already powered off
2B2B3502 Power on in progress
2B2B3503 Power off in progress
2B2B3504 Remove domain KO
2B2B3505 Master IOB not defined
2B2B3506 Master QBB not defined
2B2B3507 NVRAM missing
2B2B3508 Domain <domain name> requested by <action>
2B2B3600 Command sent by Bios to PMB
2B2B3601 Message returned to BIOS by PMB
2B2B3602 BIOS log queue overflow control
2B2B3700 ERC mode
2B2B3701 ERC interrupt
2B2B3702 Error in Machine Check processing
2B2B3703 ERC signal configuration state
2B2B3704 ERC log queue overflow control
2B2B3705 BIOS log queue state
2B2B3706 Burst of machine check errors
2B2B3707 Burst of machine check errors terminated
2B2B3800 Invalid IPMI response length
2B2B3801 IPMI command received