User`s guide

C-36
User’s Guide
Description
2B2B2303 PAM software checks the connection with PMB
2B2B2304 PAM software detected a connection error with PMB
2B2B2305 RPC trace message (PAP <–> PMB dialog)
2B2B2306 RPC connection error
2B2B2307 RPC error
2B2B2400 Cannot add object
2B2B2401 Cannot remove object
2B2B2402 Object added to collection
2B2B2403 Object removed from collection
2B2B2404 Inconsistency in filter
2B2B2405 Subscription test (used to validate a new event subscription)
2B2B2406 <PUID (or ProgID)> is not a valid event processor
2B2B2407 Cannot submit event to subscription
2B2B2408 Inconsistency in subscription
2B2B2409 Event object in use
2B2B240A Error sending autocall file
2B2B240B Error sending mail
2B2B240C Server not declared
2B2B240D User not declared
2B2B240E Too many pending autocall files
2B2B240F Local directory not configured
2B2B2410 Autocall heartbeat
2B2B2500 Cannot remove unit: <PUID>
2B2B2501 FRU Maintenance Procedure command failed
2B2B2502 FRU Maintenance Procedure command <command name> OK
2B2B2503 CPU KO returned by the BIOS (Performance restricted)
2B2B2504 CPU damaged (Caches) returned by the BIOS (Functionally
restricted)
2B2B2505 CPU absent returned by the BIOS (Unresponsive)
2B2B2506 QBB KO returned by the BIOS
2B2B2507 QBB damaged (SPS KO) returned by the BIOS
2B2B2508 Status unknown returned by the BIOS
2B2B2509 PIROM data format revision unknown
2B2B2510 Invalid PIROM data
2B2B2511 Invalid memory size
2B2B2512 CPU FRU–EEPROM written
2B2B2513 Module Power configuration: normal
2B2B2514 Module Power configuration: critical
2B2B2515 Module Power configuration: fatal
2B2B2516 Module SPSFanBox configuration: normal
2B2B2517 Module SPSFanBox configuration: critical
2B2B2518 Module SPSFanBox configuration: fatal